Polarization insensitive switchable metamaterial absorber/reflector for X-band applications

M. G. Mustapha, M. K. A. Rahim, N. A. Murad, O. Ayop, S. Tuntrakool, M. A. Baba, A. Y. Iliyasu, Mohd Ezwan Jalil

Abstract


A unit cell of squared shaped polarization-insensitive switchable metamaterial absorber/reflector is presented. The structure operates at 10.20 GHz under both absorber mode and reflector mode configurations. Copper wire bridging the gaps to form a circular shape structure were used as switches for operation mode selections. The structure was designed on an FR4 substrate, and the incidental wave angles were varied from 0 to 50 degrees. The structure demonstrated almost 100% absorption at resonance, 3.314 GHz percentage bandwidth at 80% as an absorber. On the other hand, as reflector, it demonstrated almost a 90% reflection and a usable bandwidth of 3.327 GHz.



Keywords


Absorber; AMC; Metamaterials; Reflector; Switchable

Full Text:

PDF


DOI: https://doi.org/10.11591/eei.v9i6.2196

Refbacks

  • There are currently no refbacks.




Bulletin of EEI Statistics

Bulletin of Electrical Engineering and Informatics (BEEI)
ISSN: 2089-3191 , e-ISSN: 2302-9285
This journal is published by the Institute of Advanced Engineering and Science (IAES) .